Airport trench drains come in a few different options
Swiftdrain airport trench drain need to ensure proper load bearing, stability and longevity. Planes call for some of the heaviest load requirements. Within airport classes are subclasses depending on how large the aircrafts are.
County airports generally call for a class D rating. 4” wide ductile iron grates with a sloped system are generally used. Because planes are smaller ductile iron grates are suitable. Load ratings are usually D or E.
Municipal airports usually use cast or ductile iron grates such as 8” wide or 12” wide. Load ratings generally call for E or F. The runways may expect larger planes by the hangars so if only small private planes are expected sometimes these airports use a smaller system by the hangar. Sloped systems are generally used.
International airports call for large trench grates with bolt down mechanisms. They can be 12” wide or 14” wide and up. The grates generally have a larger open area to efficiently drain water flow In the event of rainy weather. The bolts ensure that the grates do not shift or get sucked up into the airplane. Larger Airports generally call for a class E or F rating. The channels may even be larger than a yard deep.
Fun fact: The first and second time trench grates were used was in an airport in England.
Airport trench drains require a bolting mechanism to offer greater stability
We can offer full systems or grates as necessary.
Give us a shout to go over some of your options today at 516-647-2672.
We have solutions in both ductile iron and cast iron.
How to get started? Get A Quote Today!
Either order some of our more popular products through our online shop, fill out this form, give us a call at 718-461-2346, email us at info(at)swiftdrain.com or fax us at 516-624-8406. We’ll go over your options, find solutions and get you a quote.
We’re headquartered in New York, distributing in all 50 states.